Table 1. CA-1000 Cabling
264
National Instruments • T
el: (800) 433-3488
•
Fax: (512) 683-9300
•
[email protected] •
ni.com
Custom Conditioning Enclosure
Measurements
Interface Panelettes
National Instruments also offers interface panelettes, which expand
the functionality of the CA-1000. Interface panelettes include traditional
interface controls and displays, such as rocker switches, toggle
switches, momentary switches, potentiometers, and LEDs. Using
interface panelettes, which are mounted alongside I/O panelettes, you
can change hardware inputs, trigger events, or verify operational status.
Each interface panelette includes lead wires for connection to the
screw terminals of the accessory mounted inside the CA-1000.
Cabling
The cabling needed to connect the CA-1000 to the measurement
device depends on the accessories installed in the CA-1000 and the
measurement device used. Some accessories installed in the CA-1000
require internal cabling to connect the accessory to the CA-1000 wall.
Use Table 1 to determine what cabling components you need,
including the cable to your measurement device.
The CA-1000 also provides the flexibility of five external
interconnection locations, giving convenient cabling for laptop
applications by aligning the I/O connector with the location of the
PCMCIA slots on laptop computers. With the five external
interconnection locations, you can also customize desktop and
rack-mount applications for added convenience.
Configurable Signal Conditioning Enclosure
Connector Blocks
Device SC-204x Series CB-50LP CB-68LPR or SCB-68
68-pin E Series DAQ Devices (except DAQCards) R68M-50F and SH68-68-EP
1
N/A SH68-68-EP
1
100-pin E Series DAQ Devices
3
Applicable for one leg N/A SH1006868
Latching E Series DAQCards: R68M-50F and SHC68-68-EP N/A SHC68-68-EP
DAQCard-6062E, DAQCard-6024E – – –
Nonlatching E Series DAQCards: R68M-50F and PSHR68-68 Shielded Cable Kit
2
N/A PSHR68-68 Shielded Cable Kit
2
DAQCard-AI-16E-4, DAQCard-AI-16XE-50
68-pin Digital I/O and Counter/Timer Devices (except DAQCards) N/A N/A SH68-68-D
1
PCI-DIO-32HS, PXI-6533, AT-DIO-32HS, – – –
NI 6534, NI 660x – – –
Nonlatching 68-pin Digital I/O DAQCards: N/A N/A PSHR68-68-D1 Shielded Cable Kit
DAQCard-6533 – – –
Simultaneous Sampling Multifunction DAQ Devices N/A N/A SH68-68-EP
1
PCI-6503 N/A R5OM-50F and SH50-50 N/A
PC-DIO-24 – – –
DAQCard-DIO-24 N/A R5OM-50F and PSH27-50F-D1 N/A
NI 6527
3
, PCI-DIO-96
3
, PXI-6508
3
, DAQPad-6508
3
N/A Two R50M-50F and R1005050
4
N/A
PC-DIO-96
3
N/A Two R50M-50F and NB5
4
N/A
1
You can also use the SH68-68R1-EP or R6868.
2
You can also use the PR68-68F.
3
You can use two CA-1000 enclosures with one of these devices. Please note: If you are using a NI 435x series data logger, please
see Figure 1 on page 298 for information on cabling to a CB-68T and CA-1000.
4
Splits into two 50-pin connectors. See page 319 for information on using the CA-1000 with signal source products.
Table 2. CA-1000 Panelette Options
Minithermocouple BNC SMB Dual 9-Pin D-Sub Banana Jack LEMO (B-Series) MIL-Spec
Toggle Switch Rocker Switch LED Strain Relief Potentiometer Momentary Switch Blank Filler
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commenti su questo manuale